Enigma Video

You can see all videos related to the function and use of the Enigma Mileage Correction Tool.

We will add more videos, please check back regularly. (These videos are linked directly to Youtube.)
 

Mercedes CLS EZS Key Module

Read secured Motorola 9S12 without removing with 4 wires

Erase 35080 with the Enigma Mileage Correction Tool

Here is an example using the Enigma reading the secured Motorola 9S12 microprocessor.
The Enigma is fully capable of reading this secured micro, normally you would have to remove this chip.
With the Enigma , you can perform mileage correction with only a few wires within minutes		 You can see how the Enigma unlocks all secured 9S12 micros.

We have even added an editor which allows you to read, save, write and edit, very useful for future cars or other applications.		 Erase and program the 35080 with the Enigma mileage correction machine.
There is no need to read then save, then load , etc
Simply read the old value and change with the new value, the Enigma will do the rest.

Mercedes C Class W203 by Dashplug

Audi S5 test mode

CAS3 DXP by Plug Diagnostic

Using the Enigmatool, you can program the clock without opening it up. You have an option to either flash the dash (so that you do not need to do the key module EZS,EIS) or you can change the value and then program the key module EZS,EIS later.
Here is an interesting video.
We noticed that when in test mode, the instrument cluster rolls credits to the developers, just like in an ending of movie.
 Using the Enigma mileage correction tool you can correct the km or miles by only connecting 4 wires to the plug. +12, -12v , Can High and Can Low.
There is normally no need to solder to the processor.

Porsche 997 by OBD2 with the EnigmaTool

BMW Economy Needle Removing Tool

BMW mph,kmh,rev,temp and fuel needle removal procedure.

 

 

Supported models:

All Caymans 987
All Boxters 987
All 911 Carerra
 
Finally you don't need to remove the instrument cluster and be scared of scratching the dash or leather..
 
Read/write eeprom possible to make backup.
Just plug obd2 connector and go ahead without any problems and save your time!
Developed exclusively by the ENIGMA TEAM
Only Enigma can do it !!
 Specially designed by Revtronic, with the easy use of this tool, you can remove the BMW economy needle.

Doing repairs to BMW clocks instrumnet clusters, most people find it hard to remove this needle, often damaging the cogs.

Revtronic EnigmaTool have release this tool, a must for all workshops.

We have also made the centre long shaft replacable, just incase you accidentaly snap the pin.

Revtronic Enigmatool show you how to remove the needles on the BMW E39,X5, and other models where the needle has a damper spring.


No damage and takes less than 10 seconds to remove .
All you need are some side cutters and thats it !

Dont forget you will need the economy needle removal tool , which we can supply.
 

If you are having problems viewing the videos please ensure that you have the latest flash player installed and that you can access Youtube in the country that you are in.
 

Contact Us

Revtronic
185 Morley Street
Bradford, BD7 1BE, UK
Office Hours :
10am to 5pm | Monday to Saturday
Click here to contact us

Consider this...

Before buying any other tool, be sure
to see our questions page. This will
help you with some basic questions
you need to consider when
considering a mileage correction tool.
Read more >>

Essential Tools

We can source and provide you with
virtually any Car Diagnostic tool currently
available, such as the Mercedes Benz
Star Diagnostic version 2008, the BMW GT1
tool, Renault Clip, FORD IDS system
and lots more >>
caS3_offer