Description
AUDI Q8 4M F1 & E/G TRON Stop Speed Can filter Freezer
SPEEDO WORKING !
Installation is really simple , simply remove the cluster , remove dash plug , insert into the Stop filter , That’s it.
Plug and play , no cutting of any wires.
This is probably the best available on the market .
Very high quality wiring and automotive grade pcb and electronics.
The board has been tested rigorously and has surpassed all tests.
Some of the features are :
- Superb standby current , not interrupting anything in the car
- Intelligent can bus wake up , wakes up when the car starts working
- High speed can transceivers , work in harmony with the vehicle.
- Programmed to exact specification of the car so there are no spurious data packets.
(Intended for off road , dyno testing and research purposes.)
(Cruise control NOT required)
Activation Procedure :
Hold and keep pressed the scroll button on the steering wheel.
There are 4 modes , change each mode by pressing the scroll button :
Normal.
10%
20%
0% all with fully speedo working
For 0% is 3x blink on cluster.
If you set to 0% you MUST switch off the car, leave, close the doors by remote, wait 10 minutes ( it must be 10 minutes exactly , not 9 )
After it will not count but show speedo working.