AUDI TT RS FV Stop Speed Can filter Freezer


Quantity discounts
1-2 3-5 6+
£120.83 £116.60 £113.58
Category: SKU: AUDI TT RS FV


AUDI TT RS FV Stop Speed Can filter Freezer


Installation is really simple , simply remove the cluster , remove dash plug , insert into the Stop filter , That’s it.

Plug and play , no cutting of any wires.

This is probably the best available on the market .

Very high quality wiring and automotive grade pcb and electronics.
The board has been tested rigorously and has surpassed all tests.

Some of the features are :

  • Superb standby current , not interrupting anything in the car
  • Intelligent can bus wake up , wakes up when the car starts working
  • High speed can transceivers , work in harmony with the vehicle.
  • Programmed to exact specification of the car so there are no spurious data packets.

(Intended for off road , dyno testing and research purposes.)
(Cruise control NOT required)


Activation Procedure :

Hold and keep pressed the scroll button on the steering wheel.

There are 4 modes , change each mode by pressing the scroll button :

0% all with fully speedo working

For 0% is 3x blink on cluster.
If you set to 0% you MUST switch off the car, leave, close the doors by remote, wait 10 minutes ( it must be 10 minutes exactly , not 9 )

After it will not count but show speedo working.