Stop Speed Freezer for :
1 Series (F20, F21)
2 Series (F22, F23)
BMW X1 (F48)
Works with all F Chassis cars fitted with CAS/BDC/FEM .
This will work when the car has been updated at the dealer. New coding and firmware updated.
Installation is really simple , simply remove the cluster , remove dash plug , insert into the Stop filter , That’s it.
Plug and play , no cutting of any wires.
Activation Procedure :
Turn ON is done by pressing BC on the column switch for 10 seconds. (Turn signal indicates ON)
Turn OFF is done by pressing BC on the column switch for 10 seconds.
Repeat the process to switch from mode to mode. The turn lights flash briefly according to the currently selected mode: Mode 1 = 1x flashing, Mode 2 = 2x flashing etc.
Mode 1: The mileage is stopped. The speed indicator and assistance systems work. (This mode only works with G models WITHOUT a software update from 2019)
Mode 2: The mileage is stopped and the speed indicator and assistance systems do not work. (This mode only works with G models WITH a software update from 2019)
Mode 3: The counted miles are halved (1/2) and the speed indicator shows half of the actual speed.
Mode 4: The counted miles are quartered (1/4) and the speed indicator shows quarter of the actual speed.
The Can Blocker always maintains the last applied settings. Hence, you don’t have to change the settings before starting the car next time.
The device can be activated or deactivated, either while driving or when stationary
This is probably the best available on the market .
Very high quality wiring and automotive grade pcb and electronics.
The board has been tested rigorously and has surpassed all tests.
Some of the features are :
- Superb standby current , not interrupting anything in the car
- Intelligent can bus wake up , wakes up when the car starts working
- High speed can transceivers , work in harmony with the vehicle.
- Programmed to exact specification of the car so there are no spurious data packets.
(Intended for off road , dyno testing and research purposes.)
(Cruise control NOT required)